Posts

TAKING CARE OF YOUR WASHING MACHINE

1. Inspect the hoses

Water hoses

Check your washing machine’s water hoses for signs of wear or weakness a few times monthly year. If you discover any cracks or blistering, replace the hose. Any damage could cause a leak or burst – and extremely expensive flood damage in your home.

Most manufacturers recommend replacing the hoses every five years. For more peace of mind, use high-quality, stainless steel hoses.

2. Prevent flood damage

Floodstop

In the event that your washing machine’s fill hoses burst or water level switch malfunctions, you’ll have instant water damage in the room.

These two products can prevent this:

  • Water Shutoff System
    This water shutoff system prevents water damage by automatically shutting off the water flow when a malfunction is detected. Installation can be completed in five minutes. No special tools are needed.
  • Washing Machine Overflow Pan
    For smaller leaks and drips, this popular plastic panfits beneath a washing machine and will protect a floor from water damage due to overflow and leakage. It has a fitting to accommodate drain line attachment.

3. Don’t overload it

Open washing machine

Follow the owner’s manual’s instructions for appropriate loading sizes. Oversized loads will throw the machine off balance and that will lead to problems.

4. Keep it level

Level

It’s abnormal for washing machines to vibrate the floor and walls of your laundry room. If your washing machine is not exactly level, with all four legs on the floor, it may rock back and forth and vibrate strongly.

It’s best to keep the machine as close to the floor as possible. The closer the machine sits to the floor, the less it will vibrate. The front legs are adjustable with a locknut. Position the legs at the desired height and tighten the lock nut against the body of the machine so that the legs cannot rotate. Some models also have adjustable legs in the rear, too. Follow the same process for adjusting those.

It is more common for machines to have self-adjusting rear legs. Ask someone to assist you with this. Tilt the machine forward on its front legs so that the rear legs are three to four inches from the floor. When you set the machine back down to rest all on all four legs, the legs should adjust automatically. If you find that they are not level, tilt the machine forward again and tap on the rear legs with the handle of a hammer to loosen them.

5. Use the appropriate amount of detergent

Washing machine detergent

Regardless of what’s recommended on detergent packaging, follow your owner’s manual for the manufacturer’s recommended amount of detergent.

6. Clean the inside once monthly

Washing machine inside

It’s common for detergent residue to build up inside of washing machine tubs. Use a cleaner once per month to keep high-efficiency washing machines free of odor-causing residue.

7. Clean out the fabric softener dispenser

Fabric softener dispenser

Gooey in nature, liquid fabric softener is known to gum up along fabric softener dispensers. Use a damp rag and hot water to clean the dispenser periodically.

8. Polish the outside

Appliance cleaner

Spilled detergent, stain remover and fabric softener dry to a sticky mess. This all-purpose cleaner and a rag will make cleaning easy.

9. Touch up gashes and scrapes with paint

Appliance touch-up paint

Prevent rusting by taking care of gashes and scrapes right away using touch-up paint.

Call Absolute Appliance Repair NOW if you have any problems with your washing machine!

Phone lines

(415) 831-1259 San Francisco
(415) 388-0690 Marin County
(650) 525-0512 South SF / Daly City / Pacifica