Try These Tips If Your Dryer Isn’t Drying Your Clothes Properly
You depend on your dryer every time your clothes are wet. But all that excess moisture might not have anywhere to go. In other cases, your dryer may not be able to remove the moisture effectively, leaving you with a soggy pile of laundry. If you run the dryer again, your energy bill will only increase. Instead of leaving your clothes out to dry, find out why your dryer isn’t doing its job and how to fix it.
Troubleshooting Your Dryer
If your clothes aren’t coming out as dry as they used to, there’s a few things you can try before bringing in the professionals or replacing your appliance outright.
Clear the Lint Trap
You’ll need to clear the lint trap after every cycle to prevent lint from building up inside the machine. The trap is designed to collect all those fluffs of hair and clothing. If the trap is full, the machine may have trouble drying your clothes. Check the slot where the trap is stored to make sure lint isn’t blocking the vent. This should improve the air flow in your dryer, so your clothes can dry faster.
Clear the Exhaust Duct
Dryers generate heat when drying your clothes. They send the excess heat through the exhaust, which is located outdoors. The machine needs air to get rid of the moisture once it has been removed from the fabric. If the exhaust is blocked or clogged, the interior will get humid, and your clothes will still be wet. Clear any debris away from the exhaust vent to keep the air flowing, including leaves, weeds, grass clippings, and snow in the winter. Make sure the vent is pointing away from your home and towards the open air.
If the vent is clear, check the inside by loosening the metal ring that houses the exhaust. Once the exhaust is loose, you should be able to slide it off. Clean out the inside before reattaching for better air flow.
Don’t Overload Your Dryer
You should never put too many wet clothes in the dryer. This could cause the machine to overheat or lead to permanent damage. Your clothes should have enough room to move and tumble as the chamber spins. This is an essential part of the drying process. You can always run another cycle after the load is finished.
If your dyer isn’t heating up at all, you’ll need to consult the professional for assistance. There may be a mechanical failure inside the machine. Certain components may need to be repaired or replaced if the machine is still salvageable. Contact Absolute Appliance Repair in San Francisco to schedule an appointment with a repair expert today.