Keeping Your Appliances Safe When Moving to a New Home
So, you’re moving to a beautiful new home and you want to take all those hefty appliances with you. But before you load everything into the truck, you need to make sure that your appliances are ready for the big move. All that rattling around on the road can damage some of your most valuable items like the refrigerator, stove, automatic dishwasher and your washer and dryer. If you’re not careful, some of those big-ticket items might not work properly when you arrive at your new home. Protect your appliances with these moving tips from Absolute Appliance Repair, your local home appliance service company.
Packing Up Your Fridge
Before you pack up the fridge, make sure that you leave it unplugged for at least 24 hours. This gives the fridge some time to defrost. As soon as it’s unplugged, throw out any perishable items and thoroughly clean all surfaces including the bottom drawers, shelves, and the walls. Make sure that you’ve removed all the water from the freezer where large chunks of ice tend to form, unless you want to unpack a fridge full of mildew. Lastly, take out the shelves and drawers and secure them separately before you load the fridge onto the truck.
Clean Out the Stove/Oven
Just like your fridge, start by cleaning out the inside of your oven and wiping down the stovetop. Pack up and clean all the loose pieces, including the racks and knobs. Finally, you’ll need to unplug the stove from the wall. Make sure that the gas has been turned off before you try to unplug the stove. Unless you have experience installing and uninstalling your stove, you should contact the manufacturer or your local gas company for assistance or more information.
Removing the Dishwasher
To start, remove any dishes and the utensil rack. While most dishwashers are pretty good at keeping themselves clean, take a moment to examine the inside. Wipe down the sides, top and bottom if you notice any splashes or stains. Leave the door open and let the interior air dry for at least 24 hours to prevent mold and mildew.
Before you remove the unit, you’ll need to disconnect the power and water supply. Unless you have direct access to the power cord, you can switch off the electrical circuit. Once the power and water have been turned off, disconnect the water supply hose, let it drain, and dry it off with a towel.
Prepping Your Washer and Dryer
Washers and dryers tend to be extremely sensitive. Before you start tinkering with either machine, contact the manufacturer or the user’s manual for detailed moving instructions. You’ll need to disconnect the hoses and pack them in a separate container. The most vulnerable part of the machine is the drum, which is usually located at the back of the washer. Make sure that you’ve secured the drum before you begin handling the machine.
For all appliances, make sure that all the doors have been tapped shut. Any loose items need to be packed separately or physically tapped to the inside of the machine. Secure all power cords with a zip tie or some tape. If you have any questions along the way, contact the manufacturer or your local appliance home service company for assistance. It’s always better to be safe than sorry when dealing with such large, valuable pieces of equipment.
If you discover that some of your appliances have been damaged in the move, contact Absolute Appliance Repair for all your home and kitchen appliance repair needs!